Jeremy'S It Lab Ccna 200 301 Course

802.1Q tag: The [...] field identifies the VLAN the frame belongs to.

802.1Q tag: The [...] field indicates that a frame can be dropped if the network is congested.

802.1Q tag: The [...] field is use for Class of Service.

802.1Q tag: The DEI field is [...] in length.

802.1Q tag: The PCP field is [...] bits in length.

802.1Q tag: The TPID field is [...] bits in length.

802.1Q tag: The TPID field is alway set to a value of [...]

802.1Q tag: What does DEI stand for?

802.1Q tag: What does PCP stand for?

802.1Q tag: What does TPID stand for?

802.1Q tag: What does VID stand for?

Configure the allowed VLANs on a trunk port: SW1(config-if)# [...]

Configure the encapsulation type on a trunk port: SW1(config-if)# [...]

Configure the interface as a trunk port: SW1(config-if)# [...]

Configure the native VLAN on a trunk port: SW1(config-if)# [...]

Configure the VLAN number on a router subinterface: R1(config-subif)# [...]

Display all trunk ports on the switch: SW1# [...]

For security purposes, it is best to change the native VLAN to an [...] VLAN.

ROAS involves configuring VLAN tags and IP addresses on router [...].

The 802.1Q tag is [...] bytes in length.

The 802.1Q tag is inserted after the [...] field of the Ethernet header.

The default native VLAN is VLAN [...] on all trunk ports.

The Extended VLAN range is [...] to [...]

The Normal VLAN range is [...] to [...]

The range of usable VLANs is [...] to [...]

The switch does not add an 802.1Q tag to frames in the [...] VLAN over a trunk link.

VLANs [...] and [...] are reserved and cannot be used.

VLANs: [...] ports are known as 'tagged' ports.

VLANs: [...] ports are known as 'untagged' ports.

VLANs: Switches will tag frames sent out of [...] ports with a VLAN number.

What is a Cisco proprietary VLAN trunking protocol?

What is an industry standard VLAN trunking protocol?

When a switch receives an untagged frame on a trunk port, it assumes the frame belongs to the [...] VLAN.