3E2X1 Air Force

Which Air Force Instruction (AFI) replaces and substantially changes 91-series Air Force Occupational Safety and Health (AFOSH) standards?

When no technical order (TO), Air Force instruction (AFI), or operating instruction (OI) covers an existing hazard, what process can you use to assess risks and determine adequate safeguards or procedures to manage the risks?

Many hazards on the job can be eliminated by

What takes away your ability to react quickly while operating motor vehicles?

According to Air Force Instruction (AFI) 91-207, USAF Traffic Safety Program, what is prohibited while operating a government owned vehicle while on or off a Department of Defense (DOD) installation?

What is the proper way to dismount a piece of equipment?

Before mounting a piece of equipment, you should do a quick walk around to

When operating equipment in confined or hazardous areas, how can you lower the chances of an accident?

Electrical power tools do NOT require grounding if the

What is produced when you have extension cords plugged into power strips?

In reference to personnel protective equipment (PPE), which safety equipment items could be described as the MOST important?

Which type of hardhat SHOULD YOU NOT wear on jobs with heavy overhead assembly work near energized electrical lines?

Which Air Force Instruction (AFI) publication governs the use of protective devices?

What is an advantage, if any, for drivers and passengers who wore seatbelts when involved in accidents?

In reference to protection equipment, what does the acronym "ROPS" stand for?

Which is a TRUE statement about the PREENCE of a rollover protection system (ROPS)?

What MUST you do when a rollover protection system (ROPS) is damaged?

What MUST every member of your crew wear when working on or near a roadway with traffic?

The PRIMARY purpose of traffic control devices is to ensure the safety of

Air Force Instruction (AFI) 91-203, Air Force Consolidated Occupational Safety Instruction, states that civil engineering must use which manual as a guide for planning and placement of traffic control devices?

In a roadway construction worksite, what is the MOST COMMON type of traffic control device used in day-to-day operations?

What is the MAIN factor used to determining the placement of advance warning signs for a roadway construction work zone?

Which of the five areas of a work zone includes two DISTINCTIVE areas?

In a work zone, what signifies the official end to the termination zone?

Which page of the AF Form 1800, Operator's Inspection Guide and Trouble Report, has areas for operators to sign signifying the completion of the vehicle inspection?

Where are the discrepancy item numbers placed on the AF Form 1800, Operator's Inspection Guide and Trouble Report, when turning in a vehicle to maintenance?

In regards to vehicle maintenance, which action IS NOT normally and operator's responsibility?

Failure to lubricate a piece of equipment or vehicle properly when required constitutes

While cleaning a vehicle, where would you find an oil water separator to dispose of engine degreaser?

What must be completed for an AF Form 171, Request for Driver's Training and Addition to U.S. Government Drivers License, to be considered valid for licensing purposes?

The only individuals who can sign your AF Form 171, Request for Driver's Training and Addition to U.S. Government Drivers License, for licensing purposes are those

As a good rule-of-thumb, how many hours of training should you receive before being licensed to operate a particular piece of equipment or vehicle?

What two things MUST you have to receive a government driver's license?

The AF Form 2293 U.S. Air Force Motor Vehicle Operator Identification Card, is used to establish and update what document?

What training must you, as a pavements and construction equipment operator, have before you are certified to drive on the airfield?

How often must pavement and construction equipment operators be recertified on dump truck tailgate removal and installation?

Which soil horizon is the base for ALL TYPES of pavement constructions?

The soil property "cohesion" refers to the soil's ability to

Which soil classification is made up of sand and gravel in the "B" horizon and has 50 percent or LESS material passing the No. 200 sieve?

When compacting soil (subgrade) for stabilization, which function does a blanket or insulating course serve?

The device on the self-leveling level used to center the bubble on the bull's-eye is the

When you carry the engineer level over rough terrain between points on a survey, you should always

When you are setting up the tripod of the engineer level on sloping surfaces, place the third leg

When measuring vertical distances, who moves the target up or down until it is bisected?

What is ACTUAL datum used as a reference for measuring elevations?

Bench marks are survey markers denoting a precise elevation. Where would be a good place to put a PERMANENT bench mark?

How many satellites make up the Global Positioning System (GPS)?

The Global Positioning System (GPS) operates off of what type of signal?

What type of slight tolerance projects is the Global Positioning System (GPS) not well suited for?

What percentage of increased accuracy are laser systems capable of providing over conventional methods?

What is the MOST COMMON length of a carpenter's level we use on small projects?

In working drawings, plan views correspond to the orientation of looking

What basic symbol in work drawings requires the GREATEST understanding?

A line composed of a series of short dashes on a construction drawing

When preparing a sketch for a sidewalk, which step should you perform FIRST?

When preparing a sketch for a sidewalk, what should you add in the clear space on your working sketch?

When managing a construction project, what dictates the types and amount of equipment you have on your project?

Which document do you use to list all the materials you need to order for a specific construction project?

If an item for your construction project costs ore than the allowable government purchase card (GPC) limit and supply is unable to purchase the item for you, you must submit an

Managing a construction project begins when

When managing a construction project, what items let you know when it will be complete?

What is the FINAL step of managing a project?

What are the two COMMON EXPAMPLES of hazards associated with the use of hand tools?

When working in areas where sparks could be an ignition around flammable substances, you should use hand tools made from what type of metal?

What is the life-span of a tool or item of equipment when properly maintained and used under normal conditions?

A good way to encourage workers to put a tool in its proper place is to

What should you do if one belt of a matched set of four needs to be replaced on a piece of equipment, such as the concrete saw?

What types of bearings do you have to replace ore often than others?

What can you use, if anything, to develop a checklist for equipment without one?

On powered equipment, which item is NOT the operator's responsibility to check?

Which is the correct order of steps to follow when starting a generator?

Both types of small engines you will typically encounter operate on what three essential elements?

In a four-cycle engine ignition takes place while the piston is in what position of the compression stroke?

What causes a spark plug to be wet?

The "jumping jack" tamper's smaller foot increases what during compaction?

Which type of material can you cut with the K-12 saw?

When operating the K-12 saw, how can you offset the kickback reaction?

The benefits of using a wet cut blade on a concreate saw are the water

When using the concrete saw, you overlap saw cuts where they intersect to

What are the two measurements used to express an air compressor's air flow and pressure?

What is one way to quickly shut off the flow of air to the hose of an air compressor?

What powers a typical roller screed?

How many (if any) damaged parts can you have in an oxyacetylene welding system and still be able to use the system?

Oxygen and acetylene hoses are colored

When you light the oxyacetylene welding equipment cutting torch, a PURE acetylene flame is

If an emergency occurs in oxyacetylene welding equipment, your FIRST action is to immediately close the

What is the MAIN difference between the oxygen regulators used in oxyacetylene cutting and the oxygen regulators used in oxyacetylene welding operations?

The items that help you carry out oxyacetylene cutting tasks are cutting

You can do oxyacetylene cutting WITHOUT any special preparations on

How many types of flame-gouging techniques are there?

During PROGRESSIVE gouging, if you move the cutting torch too slow, your cut will be too

What is a very SIMPLE but CRITICAL task that you must always do before you light the torch of an oxyacetylene cutting outfit?

What metal must NEVER be used on an acetylene hose because it forms an unstable compound with acetylene?

Type A fences are used for alert aircraft areas and areas containing

When you are installing a security fence, at what MAXIMUM distance apart should you place line poles?

At least how many inches into the ground should you place security fence line posts?

Which fence component is used to support the tension of the fence fabric?

What is the diameter of post holes for posts required to be set in concrete?

Which issue with security fencing does NOT require maintenance?

If barbed wire is stretched too tightly, it could