2W1X1 Air Force

The title associated with a 2w131 is an aircraft armament

What grade restrictions apply to the 3- and 5- skill level?

What are the grade restrictions that apply to the -7 skill level?

Which major command (MAJCOM) representatives meet periodically with the Air Force career field manager to develop a list of the basic skills required to perform the duties of a 2w1?

What is the primary document used to identify life cycle education and training requirements?

What is used as a paper back up to the training buisness area (TBA)?

The Air Force Training Evaluation Program evaluates training received by graduates of

Which Air Force Program provides feedback on the efficiency and effectivness of the training courses?

Where is internal information obtained from for the Air Force Training Evaluation Program?

What is the basic grouping of positions requiring similar skills and qualifications?

What may be added to Air Force specialties to identify a specialization in a specific type of equipment or functions?

When is a special experience identifier (SEI) removed from your Air Force specialty code (AFSC)

Which skill level of technician is expected to anticipate all the needs of a section and take steps to provide for them?

which of the following is considered a duty of a 2W171 only?

The actual number and types of munitions the Air Force is going to procure and provide to a unit to conduct their training is the units

which element in the munition storage are is responsible for the coordination of all movements of munitions both within and outside the munitions storage area?

which publication lists the characteristics, parameters, limits of operation, and general operation procedures of an airframe?

in which command does 2W1 personnel service search and rescue helicopters?

An effective Air Force maintenance management system must have

If possible, maintenance should be accomplished on which basis?

In conjunction with using qualified technicians to evaluate personnel and equipment, what other method do organizations use to achieve standardization?

What type of maintenance is generated during the process of using equipment?

What are the two categories of maintenance?

On-equipment maintenance refers to maintenance tasks that are effectively performed on weapons systems or which piece of equipment?

What category of maintenance refers to a task that requires the removal of a component to a shop or facility for repair?

What are the three different types of wings?

Within the maintenance complex what is referred to as the "building block" organization of the Air Force, providing a specific operational or support capability?

Which organization is responsible for servicing, inspecting, maintaining, launching and recovering their assigned aircraft?

Who supports flight line munitions loading/unloading and weapons maintenance?

Which maintenance complex element is responsible for munitions loading/uploading during daily aircraft training, operational test and evaluation, and contingency operations?

Who is responsible for all on-equipment weapons maintenance?

Which armament flight section performs time compliance technical orders, inspections and maintenance on assigned armament systems, guns, pylons, racks, launchers and adapters?

Which Section develops and implements a program for documenting issues and receipts of in-use alternate mission equipment?

Who is considered the key individual in the application of maintenance resources to meet mission requirements?

What organization is formed under the wings weapons manager (WWM) and is comprised of the superintendent, the loading standardization crew (LSC), academic instructors and load crews?

Who is primarily responsible to monitoring certification and recurring training documents to ensure all load crew members complete required proficiency and academic training?

Who ensures the required number of load crews are trained and certified as specified in the Unit Committed Munitions List (UCML) to perform the mission and maintains load crew integrity during training and evaluations to the maximum extent possible?

Which staff function plans and schedules the entire workload and work effort for the maintenance organization?

What is the quality assurance (QA) program?

Which staff function determines aircraft and equipment condition and personnel proficiency (including the quality of training) and to increase reliability and maintainability?

What staff function manages the material deficiency reporting and technical order (TO) improvement reporting programs, tracks technical data currency, applicability and usability, and maintains a central TO file?

Which system's purpose is to store maintenance data needed by major commands and other agencies to manage and track maintenance recourses worldwide?

Integrated Maintenance Data System (IMDS) "pick list" reduce the number of failed transactions by providing

Integrated Maintenance Data System (IMDS) screens are oriented by?

What aircraft are supported by the Integrated Maintenance Information System (IMIS)

What is central component of the Integrated Maintenance Information System (IMIS)

to select an application on the Integrated Maintenance Information System (IMIS) desktop, the user can tab through the applications or

what device is used to display technical manuals used on the F-22?

how does the portable maintenance aid (PMA) interface directly with the F-22?

How many times a day must the portable maintenance aid (PMA) be docked to the maintenance server unit (MSU) to ensure the most up to date information is available to all users?

The maintenance data collection (MDC) system is designed as a tool

Which major command (MAJCOM) depends on maintenance data collection (MDC) from all Air Force organizations maintaining the types of equipment the Air Logistics Center (ALC) provides support?

What is initiated by the Air Logistics Center (ALC) when an equipment problem is indicated by the maintenance data?

Which aircraft form is primarily used to document calendar item inspections and delayed discrepancies?

Which Air Force technical order (AFTO) form is used to document each discrepancy discovered by the pilot or maintenance personnel and to document any corrective action you complete to correct a discrepancy?

What is the primary form used to list all the jobs to be completed for the day and the technicians performing the task?

Which Air Force technical order (AFTO) is used for maintaining a permanent history of significant maintenance actions on end-items?

Which air force technical order form is used to document information and maintenance actions pertaining to aerospace ground equipment (AGE)?

Which condition tag is used to identify unserviceable (condemned) material?

What term is used to identify items that are required on a recurring basis within the near or immediate work area?

What section of supply is responsible for the adequate control and maximum use of equipment?

What is the purpose of a special-purpose recoverable authorized maintenance (SPRAM) account?

The allowance standard (AS) prescribes the amount of

which category of equipment is listed on the allowance standard (AS)?

What is a computer listing showing all authorizations, assets, and due-outs (items on order) for each custodian by organization code and shop code?

What 13-digit number is assigned to all items in the supply system?

The national stock number (NSN) is established by combining which two numbers?

Through what system does the Intergraded Maintenance Information System (IMIS) order parts?

What is the primary objective of the repair cycle asset control system?

Which Air Force technical order (AFTO) form, along with the Department of Defense (DD) form 1348-1, is used to control a reparable item through the repair cycle?

What is required before a nuclear weapon system or item of equipment can be used to support a unit's nuclear mission tasking?

what document identifies equipment, hardware, software and facilities which are nuclear certified?

Air Force policy requires all modifications to nuclear certified items (NCI) be identified to the

What term refers to the amount of items packaged together when ordered ?

Who has ultimate responsibility for all property under his or her jurisdiction?

What are two ways of being relived of the responsibility for government property?

What action is taken when unserviceable property is turned in?

A report of survey is an is an instrument used to...

A report of survey must be initiated within how many days after the discovery of loss?

Which inspection is performed before resuming flying after the aircraft has been inactive for a specified period?

Which inspection is a between-flight inspection of aircraft or weapons system components when an immediate turnaround or a continuation flight is scheduled?

Which inspections is performed after the last flight of the dat or flying period?

Which scheduled inspection is due when the required number of flying hours, rounds fires by a gun system, or calendar time has expired?

Which inspection is a combination of parts of the basic post operation (BPO) and/or hourly postflight (HPO) and periodic inspection requirements?

What kind of inspection must maintenance personnel perform on all newly assigned aircraft and equipment?

What section of the -6 technical order (TO) lists items of equipment replaced at the accrual of a specific interval of time (flying hours, equipment operating time, or calendar time) and following the occurrence of a specific condition?

The purpose of the deficiency reporting (DR) system is to

Which type of deficiency limits or prevents a material from being used for its intended purpose?

Which type of deficiency normally results in an excessive consumption of maintenance man-hours?

Which deficiency is a failure of some internal component or subassembly of a piece of equipment because of material stress due to pressure and/or vibration or to excessive material wear?

In which publication will you find information or the change or revision status of a technical order (TO)?

Which electronic technical manual is available through the Integrated Maintenance Information System (IMIS) desktop and allows the maintainer access to all technical data required to perform a necessary maintenance procedure

In technical order (TO) 1F-16C-33-1-2, the designator "1F" identifies the

Which publication list major technical order (TO) indexes by category?

How are changed pages in printed technical orders (TO) identified?

What publication is issued for a technical order (TO) that contains material that is not part of the normal sequence outlined in the table of contents?

Which technical order (TO) deficiency report identifies a deficiency that affects safety and the unit mission?

Which technical order (TO) deficiency report identifies recommended TO improvements, which if not made, will create potentially hazardous conditions through continues use and have a negative effect on operation, maintenance efficiency, or an operation life or general service us of the equipment?

What is the minimum required rank to submit a technical order (TO) improvement report?

How does the user typically generate a technical order (TO) change request to change an integrated electronic technical manual?