2A6X6 Air Force

7lvl-Vol2(201), pg 1-1 Training detachments (TDs) are administratively assigned to which MAJCOM? a. Air Combat Command (ACC) b. Air Training Command (ATC) c. Air Reserve Command (AFRC) d. Air Education and Training Command (AETC)

7lvl-Vol2(201), pg 1-4 The block training method is normally used to teach which Maintenance Training Flight (MTF) training course? a. Any 7-level course b. Weight and Balance c. Maintenance Orientation d. General Technical Order System

7lvl-Vol2(202), pg 1-6 How often must the Maintenance Operations Officer/Maintenance Superintendent review and sigh the special certification roster (SCR)? a. Annually b. Semi-annually c. Quarterly d. Monthly

7lvl-Vol2(202), pg 1-6 In order to be given authority to downgrade a "Red-X" an individual must be approved by the maintenance group commander (MGX/CC) and hold the minimum grade of a. TSgt b. MSgt c. SMSgt d. CMSgt

7lvl-Vol2(203), pg 1-7 Training Business Area (TBA) provides Air Force personnel with global, real-time a. access to Distance Learning courseware b. access to special certification roster criteria listings c. visibility of available formal training courses Air Force-wide d. visibility of technical qualification, certification, and training statuses of personnel

7lvl-Vol2(203), pg 1-7 In training business Area (TBA), what type of notification does the "System Messages" board provide in addition to software release, projected downtimes, and training updated information? a. Open suspense b. System upgrades c. Application problems d. Changes to your user roles

7lvl-Vol2(204), pg 1-13 What training phase has these four sub-phase: multiphase, MAJCOM mandatory, freeflow, and maintenance qualification training? a. I b. II c. III d. IV

7lvl-Vol2(204), pg 1-14 What continuation training consists of academic and practical hands-on courses that complement initial skills training received through AETC mission ready airman (MRA) and training detachment (TD) courses? a. Maintenance qualification b. Maintenance refresher c. On-the-job d. Ancillary

7lvl-Vol2(205), pg 1-15 How often does the maintenance training flight (MTF) provide a status of training (SOT) briefing to the maintenance group commander (MXG/CC)? a. Monthly b. Quarterly c. Semi-annually d.Annually

7lvl-Vol2(205), pg 1-15 An individual comes due for a training recertification while TDY, on leave, or incapacitated. Provided it has not been more than 60 days since the original due date, how many days are allowed after returning before decertifiction is required? a. 15 b. 30 c. 45 d. 60

7lvl-Vol2(205), pg 1-17 Who is responsible for conducting an interview with both the trainee and his/her supervisor before the trainee starts a career development course(CDC)? a. Operations officer b. Group commander c. Unit training manager d. Maintenance training flight commander(MTF/CC) or chief

7lvl-Vol2(206), pg 1-21 Manpower authorizations are a. funded b. unfunded c. unvalidated d. both funded and unfunded

7lvl-Vol2(207), pg 1-23 The Maximum continuous duty time you can schedule your workers for without getting maintenance group commander(MXG/CC) approval is a. 12 hrs b. 13 hrs c. 14 hrs d. 15 hrs

7lvl-Vol2(207), pg 1-23 Maintenance group commanders are the final approval authority for exceeding a 12 hr shift up to a. 14 hrs b. 15 hrs c. 16 hrs d. 18 hrs

7lvl-Vol2(208), pg 2-2 Which agency is normally responsible for monitoring the overall maintenance supply interface and resolving supply support problems? a. Maintenance supply liaison b. Maintenance supply support c. Maintenance operations center d. Maintenance data system analysis

7lvl-Vol2(208), pg 2-2 Maintenance supply liaison personnel report directly to the command of the a. Maintenance Squadron (MXS) b. Logistics Readiness Squadron (LRS) c. Aircraft Maintenance Squadron (AMXS) d. Maintenance Operations Squadron (MOS)

7lvl-Vol2(208), pg 2-2 Which of the following is not normally a Maintenance Supply Liaison duty? a. Monitoring status of back-ordered requisitions b. Advising supervisors on supply management documents c. Soliciting and consolidating inputs to initiate a quick reference list d. Collecting and turning in expendable, excess, and surplus precious metal bearing assets

7lvl-Vol2(209), pg 2-6 Which expendability, recoverability, reparability codes (ERRC) must be assigned to an asset before it can be placed in bench stock? a. XF3 b. XD2 c. XD1 d. XB3